DE | EN | ES | CN

EXCLUDED REPAIRS

EXCLUDED REPAIRS FOR OLD MACHINES

Due to missing spare part availabilities, primarily in the supply area, ECKOLD products built before 1995 can no longer be repaired (CE-Conformity).

Kraftformer

Kraftformer KF 309, KF 310, KF 400, KF 653 (all variants)

No repair possible!

Kraftformer

Kraftformer KF 460 and KF 665

A supply of spare and wear parts for the Kraftformer can currently be provided and guaranteed for machines built from 1995 onwards.

No mechanical repair for machines built before 1980.


Note: Until 1979 a „display head” was installed which was replaced in 1980.

Kraftformer programme

The whole electric equipment of machines built before 1995 is no longer available and will not be supported.

 

 

Hydraulic drive units

Hydraulic drive units HA 400, HA 550, HAT 400, HAT 500, HAT 520, HA 500/2 – all variants, HAT 450/18

No repair possible!

Hydraulic drive units

Hydraulic drive units model series HA 510 XX

Spare part no longer available.

Due to EU directives we had to supply the drive motors according to efficiency level of IE2 from 2011 onwards resulting in a larger vertical size of the motors.

Conclusion: Unfortunately NO motor is available as a replacement for hydraulic drive units built in 2011 and earlier.

 

 

Portable clinching pliers

Portable clinching pliers types MZD 25/3, MZD 30/6, MZD 35/6 · Portable one-hand clinching frame e.g. type „MCD 30/5 Piconet“ or „MCD 15/5 Handy“ or DFZ 55/35

Built before 1995

No repair possible!

Portable clinching pliers

Portable clinching pliers MZ 10, MZ 20, MZ 30

Built before 1995

No repair possible!

New machinery and inserts (new applications) are offered / delivered on request.

 

 

Portable Kraftformer

Portable Kraftformer MKF 130, MKF 140, etc.

Built before 1995

No repair possible!

New machinery and inserts (new applications) are offered / delivered on request.

Stand machines

Stand machine MD 500/60

No repair possible!

 

 

Tube processing programme

Tube processing programme RAW, RAG, RKG, ROG, AHG, AHA

At this point we would like to inform you that our product range regarding machines and tools for tube processing has been stopped in the mid of 2013.

New tools and inserts (new applications) will no longer be offered / delivered.

For ECKOLD production parts, spare and wear parts will be provided until 2018/12/31.
These parts must be able to be identified with an ID-Number without any doubt.

Mobile cutting and neckforming tools

Mobile cutting and neckforming tools for sheet metal MSA / for pipes MAR

At this point we would like to inform you that our product range regarding machines and tools for tube processing has been stopped in the mid of 2013.

New tools and inserts (new applications) will no longer be offered / delivered.

For ECKOLD production parts, spare and wear parts will be provided until 2018/12/31. These parts must be able to be identified with an ID-Number without any doubt.

 

 

SUBSCRIBE TO NEWSLETTER

We keep you informed about our
latest technologies, events and products.