DE | EN | ES | CN

PORTABLE CLINCHING FRAME MCD 30/50 AH

SINGLE-HAND CORDLESS CLINCHING WITH
MCD 30/50 AH

This cordless clinching device is a low-cost and universal frame from the ECKOLD range of hand-held machines. Apart from the standard models, we offer of course also customised frames.

Do you want to produce a prototype? Do you need a fall-back option for your production? Or are there clinching tasks to be performed on site? Then opt for the MCD 30/50 AH portable clinching frame.

Technical data

  

DriveElectro-hydraulic (rechargeable battery)
Stroke frequencySingle stroke
Press forcemax. 50 kN
For clinching optionsR-DF 6, R-DF 8, G-DF 6, G-DF 8
Max. total thickness3.0 mm steel (Rm = 400N/mm²)*
4.0 mm aluminium (Rm = 250N/mm²)*
Throat, vertical32 mm
Throat, horizontal

43 mm

Width in working area32 mm

Ambient temperature

-12°C - 40°C
Cycles per battery chargeapprox. 300 at 50 kN
Battery charging timeapprox. 22 min.
Joining process cycle timeapprox. 4 sec.
 Weight (net)6.5 kg
 Weight (with carrier case) 11.5 kg

 

*The max. total thickness refers to steel and aluminium alloys with good forming properties, an elongation at break A80 ≥ 12 % and a yield-to-tensile ratio Rp0.2 / Rm ≤ 0.7. Examples: steel: DC04 • DX56 • CR180BH; aluminium: AlMg3 • AlMg4.5Mn0.4 • AlMg0.4Si1.2(T4). Deviations from these workpiece thickness combinations might be possible. For details, contact ECKOLD.

 

SUBSCRIBE TO NEWSLETTER

We keep you informed about our
latest technologies, events and products.